RHZH's work

[RHZhang]

@RHZhang is there a possibility to use the Bournemouth broadcast camera for every match? For me personally that’s the best and realistic camera.

Sure, you just need to export the data \ bcdata \ bcgameplay_348 file, copy it, rename it, and replace all bcgameplay_xx files. After regenerate the game, you can make all stadiums use Bournemouth broadcast cameras.

Of course, there is another method, which is to replace the general bcgameplay data with the data from Bournemouth broadcast camera. This way, we don't need to copy so many other files and can modify one file to achieve all stadiums having Bournemouth broadcast camera

 

[RHZhang]

Bournemouth broadcast camera for Stamford Bridge Stadium

 

[RHZhang]

In fact, there is another stadium in FIFA16 with a lower Broadcast Camera than the regular one, but slightly higher than the Bournemouth broadcast camera. If we want to make this kind of low position real broadcast camera, I think it is more suitable and can distinguish it from the small stadium in Bournemouth. Its position is close to the original effect, but with some differences.

 

[RHZhang]

I made modifications using the Broadcast Camera from the stadium I mentioned earlier and found that the height was similar to the previous default version, but it solved a problem that had been bothering me before. Now we all use CGSE to load the stadium, but for small stadiums like Luton, with the version I used to use myself, the roof of the nearby stands always blocks the view, and now it's gone.
Perhaps with just a few minor adjustments, this could become my favorite Camera version.

 

[RHZhang]

It turns out that the obstruction in front of us was removed by modifying here

 

[NonoFIFA10]

View attachment 192846
View attachment 192847
It turns out that the obstruction in front of us was removed by modifying here

I had a similar problem with a community-created stadium, and by copying values from another stadium (Selhurst Park), it became playable 100% perfect. Thanks so much, RHZhang...if you know which hexadecimal values to modify for zoom or height, that would be a great help for testing. Thanks again.

 

[RHZhang]

Still two versions of Broadcast Camera.
One is the upgrade of FIFA23 Broadcast Camera, as demonstrated in the previous video.
The other one is an upgrade to the version I have been using for many years, and the effect is not much different from before. Basically, the default effect of the game has been reduced. The main change is the removal of some stadium obstructions, such as Huddersfield and Luton Stadium. But because it is a universal setting, completely removing the obstruction will affect the effect of other football fields, so only an intermediate value was taken.
There is also a Bournemouth broadcast camera included, which lowers the perspective of all stadiums to the lowest level, removing a lot of occlusion. If you want, you can change the file name and replace it yourself.

https://www.mediafire.com/file/v0bdhvk174mgazw/NEW+Broadcast+camera+2+in+1.rar/file

 

[RHZhang]

I had a similar problem with a community-created stadium, and by copying values from another stadium (Selhurst Park), it became playable 100% perfect. Thanks so much, RHZhang...if you know which hexadecimal values to modify for zoom or height, that would be a great help for testing. Thanks again.

I made the modifications using files from Selhurst Park stadium, but I directly used its parameters or expanded the range of occlusion removal because it is designed for small stadiums, and seats and spectators in large stadiums will also be erased. So we can only strike a balance between the two, minimizing the occurrence of occlusion as much as possible without affecting the parts that should not be removed.

 

[Emran_Ahm3d]

@RHZhang
Nice work, man.
Do you know how to edit cutscene camera angles?
I would love to learn and document the knowledge.

 

[JochemLFC2]

Still two versions of Broadcast Camera.
One is the upgrade of FIFA23 Broadcast Camera, as demonstrated in the previous video.
The other one is an upgrade to the version I have been using for many years, and the effect is not much different from before. Basically, the default effect of the game has been reduced. The main change is the removal of some stadium obstructions, such as Huddersfield and Luton Stadium. But because it is a universal setting, completely removing the obstruction will affect the effect of other football fields, so only an intermediate value was taken.
There is also a Bournemouth broadcast camera included, which lowers the perspective of all stadiums to the lowest level, removing a lot of occlusion. If you want, you can change the file name and replace it yourself.

https://www.mediafire.com/file/v0bdhvk174mgazw/NEW+Broadcast+camera+2+in+1.rar/file

Thank you for your work, do you think the Bournemouth one will give problems with lower stands on the camera side or is that also fixed in those files.

Great work again!!

 

[The Wizard]

Thank you for your work, do you think the Bournemouth one will give problems with lower stands on the camera side or is that also fixed in those files.

Great work again!!

Yes, Bournemouth camera for all stadiums without some elements interfering would be the best!

 

[RHZhang]

Thank you for your work, do you think the Bournemouth one will give problems with lower stands on the camera side or is that also fixed in those files.

Great work again!!

I haven't gone to see the actual effect of each stadium, but if you find that a certain stadium is obstructed while using it, you can take a screenshot and tell me. I think I should have a way to correct these situations. Based on the current situation, the probability of an incident is relatively low because that camera is very low.

 

[JochemLFC2]

This files will change all broadcast gameplay files to the Bournemouth home camera.

Thank me later

https://www.mediafire.com/file/tvpxlcyhbdq1a3h/ALL+BOURNEMOUTH+BCGAMEPLAY.rar/file

 

[Yeray]

This files will change all broadcast gameplay files to the Bournemouth home camera.

Thank me later

https://www.mediafire.com/file/tvpxlcyhbdq1a3h/ALL+BOURNEMOUTH+BCGAMEPLAY.rar/file

You have that turf mod, that green looks fantastic

 

[Keiner]

This files will change all broadcast gameplay files to the Bournemouth home camera.

Thank me later

https://www.mediafire.com/file/tvpxlcyhbdq1a3h/ALL+BOURNEMOUTH+BCGAMEPLAY.rar/file

haye mate, can you please share the espn tv logo but without the eredivise logo at the bottom? Also what's that pitch mod? it looks great.

 

[downunderman]

I haven't gone to see the actual effect of each stadium, but if you find that a certain stadium is obstructed while using it, you can take a screenshot and tell me. I think I should have a way to correct these situations. Based on the current situation, the probability of an incident is relatively low because that camera is very low.

Still two versions of Broadcast Camera.
One is the upgrade of FIFA23 Broadcast Camera, as demonstrated in the previous video.
The other one is an upgrade to the version I have been using for many years, and the effect is not much different from before. Basically, the default effect of the game has been reduced. The main change is the removal of some stadium obstructions, such as Huddersfield and Luton Stadium. But because it is a universal setting, completely removing the obstruction will affect the effect of other football fields, so only an intermediate value was taken.
There is also a Bournemouth broadcast camera included, which lowers the perspective of all stadiums to the lowest level, removing a lot of occlusion. If you want, you can change the file name and replace it yourself.

https://www.mediafire.com/file/v0bdhvk174mgazw/NEW+Broadcast+camera+2+in+1.rar/file

so i unzipped your file, but where do we put all these files? Is there readme? Do we have to paste all of these files into our bcdata camera folder?

 

[RHZhang]

Hello everyone, today I have a new discovery. We can replace the camera in the game with something else we want, such as Replay Broadcast. As long as the name is correct, you can see from the video that the angle and height of this Broadcast Camera are similar to what was assumed in yesterday's video. However, the experience in the game is far different. The main difference is that when the football reaches the distant sideline, especially in the corner kick area, the camera does not suddenly zoom in, allowing players to only see the player in a partially enlarged area. On the contrary, it pulls the camera away, allowing them to see more of the situation on the field. I don't know what you think of this Broadcast Camera?

 

[RHZhang]

But when I directly use the default data, I find that there are occlusions on the court. Fortunately, I already know how to remove them.

and this time I also discovered the position of the parameter for adjusting the camera height.

 

[286]

How can I adjust the position of the camera height parameter? Could you share your data patch?

 

[286]

How can I adjust the position of the camera height parameter? Could you share your data patch?